زمین شناسی مهندسی

زمین شناسی مهندسی

بررسی تأثیر چگونگی استفاده ژئوتکستایل بر به‌سازی باربری مخلوط رس- شن در لایه‌های روسازی

نویسندگان
1 گروه زمین شناسی مهندسی، واحد اهر، دانشگاه آزاد اسلامی، اهر، ایران
2 گروه مهندسی عمران، واحد تبریز، دانشگاه آزاد اسلامی ، تبریز،ایران
چکیده
هدف اصلی از این پژوهش، بررسی آزمایشگاهی تأثیر نحوۀ کاربرد ژئوتکستایل در میزان توانایی باربری خاک‌های مخلوط رسی و شنی منطقه­ی باراندوز برای کاربرد در لایه‌های روسازی راه است. دراین پژوهش خاک رسی استفاده شده با خاک شنی با درصدهای (25، 50 و 75) مخلوط شده است. تأثیر ژئوتکستایل در دو حالت بررسی شد، درحالت اول به‌صورت لایه­ای (یک لایه، دولایه و سه لایه در نمونه جای‌گذاری شده است) و درحالت دوم، ژئوتکستایل به‌صورت قطعاتی با ابعاد 1×1 و 5×5 سانتی‌مترمربع به‌طور تصادفی با درصد های وزنی 1، 2 و 3 درصد با مصالح مخلوط شده و رفتار مصالح ارزیابی شده است. برای انجام تحقیق از آزمون­ آزمایشگاهی نسبت باربری کالیفرنیا (CBR) هر دو حالت خشک و اشباع براساس استاندارد ASTM D1883 بهره گرفته شده است. به‌گونه‌ای که طبق استاندارد سرعت بارگذاری mm/min 27/1 انتخاب شده و عدد CBR برای نفوذ پیستون به میزان 5/2 و 5 سانتی‌متر برآورد شده است. درحالت اشباع میزان درصد تورم در نمونه­ها اندازه‌­گیری شده است. نتایج حاصل از تحقیق نشان می­دهد که میزان بهینۀ ژئوتکستایل مورد نیاز برای مسلح کردن مصالح بررسی شده به‌صورت قراردادن 1 لایه در قسمت میانی و یا افزودن 1% وزنی ژئوتکستایل به ابعاد1×1 سانتی‌مترمربع است که این میزان در شرایطی که خاک اشباع باشد به‌طور چشم‌گیری از میزان تورم می­کاهد و از آن جلوگیری می‌کند.
کلیدواژه‌ها

1. Thevanayagam S., "Liquefaction Potential and Undrained Fragility of Silty Soils", Proc. Of 12th World Conference on Earthquake Engineering, Auckland, New Zealand, (2000) 8-20.## 2. Biswas A., Kumar Dash S., Krishna A. M., "Behavior of Geogrid Reinforced Foundation Systems Supported on Clay Subgrades of Different Strength", International Journal of Geosynthetic and Ground Engineering, 1 (2015) 9-11. ## 3. Kazi M., Shukla S. K., Habibi D., "Effect of Submergence on Settlement and Bearing Capacity of Surface Strip Footing on Geotextile- Reinforced Sand Bed", International Journal of Geosynthetic and Ground Engineering, (2015a) doi:10. 1007/s40891-014-0006-y. ## 4. Kazi M., Shukla S. K., Habibi D. "An Improved Method to Increase the Load-Bearing Capacity of Strip Footing Resting on Geotextile-Reinforced Sand Bed", Indian Geotechnical Journal, 45 (2015b) 98-109. ## 5. Latha G. M., Murthy V. S., "Effects of Reinforcement Form on the Behavior of Geosynthetic Reinforced Sand", Geotextiles and Geomembranes, 25 (2007) 23-32. ## 6. Naeinie S. A., Mirzakhanlari M., "The Effect of Geotextile and Grading on the Bearing Ratio of Granular Soils", Electronic Journal of Geotechnical Engineering (EJGE) 3 (2008) 1-10. ## 7. Shahie J., Ameri M., Khani Sanij H., "Evaluate the Effect of Geotextile on Life Fatigue of Pavement Asphalt in Iran", Journal of Transportation Engineering, 2 (2010) 41-51(In Persian). ## 8. Khabiri M. M., "Geosynthetic Material Suitable Depth Staying to Control Failure of Pavement Rutting", Advanced Materials Research, 260 (2011) 3454-3458. ## 9. Kumar Senthil P., Rajkumar R. "Effect of Geotextile on CBR Strength of Unpaved Road with Soft Subgrade", electronic journal of geotechnical engineering, (EJGE) 17 (2012) 1355-1363. ## 10. Sadeghi Azar K., Dabiri R., "The Effects of Geotextile Layers on Bearing Capacity of Gravel-Silt Mixture", Trakya University Journal of Engineering Science, 16 (2015) 61-69. ## 11. Nazari R., Dabiri R., "Comparison of Geotextile Layers Effects on Static and Dynamic behavior of Pavement", Journal of Structural Engineering and Geotechniques, 6 (2016) 15-22. ## 12. ASTM D421-85, "Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants", Annual book of ASTM standards, (reapproved 1998) (1985). ## 13. ASTM D422-63, "Standard Test Method for article-Size Analysis of Soils", Annual book of ASTM standards (reapproved 1998), (1963). ## 14. Fibertex-F-32, Fibertex Nonwovens A/S, Svendborgvej 16, 9220 Aalborg, Denmark, www.fibertex, com. ## 15. ASTM D 4318-95a, "Standard test method for liquid limit, plastic limit an plasticity index for soils", Annual book of ASTM standards (1995). ## 16. ASTM-D 698-00, "Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))", Annual book of ASTM standards, (2000). ## 17. ASTM D1883-93, "Standard test method for CBR (California bearing ratio) of laboratory- compacted soils", Annual book of ASTM standards, (1993). ## 18. سازمان مدیریت و برنامهریزی کشور، (آئین‌نامه روسازی آسفالتی راه های ایران)، معاونت امور فنی، وزارت راه و ترابری، نشریۀ 234 (1381). ##