1. Aliha M. R. M., Ashtari R., Ayatollahi M. R., "Mode I and Mode II Fracture Toughness Testing for a Coarse Grain Marble", (2006).## 2. Aliha M. R. M., Ayatollahi M. R., "Rock fracture toughness study using cracked chevron notched Brazilian disc specimen under pure modes I and II loading-A statistical approach", Theoretical and Applied Fracture Mechanicst 69 (2014) 17-25. ## 3. Aliha M. R. M. , Mahdavi E., Ayatollahi M. R., "Statistical Analysis of Rock Fracture Toughness Data Obtained from Different Chevron Notched and Straight Cracked Mode I Specimens", Rock Mechanics and Rock Engineering, 51 (2018) 2095-114. ## 4. Ayatollahi M. R, Aliha M. R. M., "Cracked Brazilian disc specimen subjected to mode II deformation", Engineering Fracture Mechanics, 72 (2005) 493-503. ## 5. Ayatollahi M. R., Aliha M. R. M., "On the use of Brazilian disc specimen for calculating mixed mode I-II fracture toughness of rock materials", Engineering Fracture Mechanics, 75 (2008) 4631-41. ## 6. Chang S. H., Lee C. I., Jeon S., "Measurement of rock fracture toughness under modes I and II and mixed-mode conditions by using disc-type specimens", Engineering Geology, 66 (2002) 79-97. ## 7. Fakhri M., Haghighat Kharrazi E., Aliha M. R. M., "Mixed mode tensile-In plane shear fracture energy determination for hot mix asphalt mixtures under intermediate temperature conditions", Engineering Fracture Mechanics, 92 (2018;) 98-113. ## 8. Guo H., Aziz N. I., Schmidt L. C., "Rock fracture-toughness determination by the Brazilian test", Engineering Geology, 33 (1993) 177-88. ## 9. Mirsayar M. M., Razmi A., Aliha M. R.M., Berto F., "EMTSN criterion for evaluating mixed mode I/II crack propagation in rock materials", Engineering Fracture Mechanics, 190 (2018)186-97. ## 10. Wang Q., Jia X. M., Wu L., "Wide-range stress intensity factors for the ISRM suggested method using CCNBD specimens for rock fracture toughness tests" (2004). ## 11. Aliha M. R. M., Ayatollahi M. R., Smith D. J., Pavier M. J., "Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading", Engineering Fracture Mechanics, 77 (2010) 2200-12. ## 12. Bazant Z. P., Gettu R., Kazemi M. T., "Identification of nonlinear fracture properties from size effect tests and structural analysis based on geometry-dependent R-curves", International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 28 (1991) 43-51. ## 13. Bazant Z. P., Pfeiffer P. A., "Shear fracture tests of concrete", Materials and Structures, 19 (1986)111. ## 14. Khan K., Al-Shayea N. A., "Effect of Specimen Geometry and Testing Method on Mixed Mode I–II Fracture Toughness of a Limestone Rock from Saudi Arabia", Rock Mechanics and Rock Engineering, 33 (2000) 179-206. ## 15. Bazant Z. P., Kazemi M. T., "Size effect on diagonal shear failure of beams without stirrups" (1991). ## 16. Yang S. Q., Su C. D., Xu W.Y., "Experimental and theoretical study of size effect of rock material" (2005). ## 17. Carpinteri A., "Decrease of apparent tensile and bending strength with specimen size: Two different explanations based on fracture mechanics", International Journal of Solids and Structures, 25 (1989) 407-29. ## 18. Hu X. Z., Duan D., "Size effect on fracture of MEMS materials" (2005). ## 19. Karihaloo B. L., "Size effect in shallow and deep notched quasi-brittle structures", International Journal of Fracture, 95 (1999) 379. ## 20. Bazant Z. P., "Size Effect in Blunt Fracture: Concrete, Rock, Metal" (1984). ## 21. Akbardoost J., Ayatollahi M. R., Aliha M. R. M., Pavier M.J., "Smith DJ. Size-dependent fracture behavior of Guiting limestone under mixed mode loading", International Journal of Rock Mechanics and Mining Sciences, 71 (2014) 369-80. ## 22. Ayatollahi M. R., Akbardoost J., "Size effects on fracture toughness of quasi-brittle materials-A new approach. Engineering Fracture Mechanics, 92 (2012) 89-100. ## 23. Ayatollahi M. R., Akbardoost J., "Size and Geometry Effects on Rock Fracture Toughness: Mode I Fracture", Rock Mechanics and Rock Engineering, 47 (2014) 677-87. ## 24. Ayatollahi M. R., Akbardoost J., "Size effects in mode II brittle fracture of rocks", Engineering Fracture Mechanics,112-113 (2013) 165-80. ## 25. Bazant Z. P., Kim J. K., Pfeiffer P., "Nonlinear Fracture Properties from Size Effect Tests" (1986). ## 26. Bazant Z. P., Kazemi M. T., "Determination of fracture energy, process zone longth and brittleness number from size effect, with application to rock and conerete", International Journal of Fracture, 44 (1990)111-31. ## 27. Lim I. L., Johnston I. W., Choi S. K., Boland J. N., "Fracture testing of a soft rock with semi-circular specimens under three-point bending, Part 1-mode I.", International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 31 (1994) 185-97. ## 28. آیتالهی م. ر., ثقفی ح., علیها م.، "بررسی اثر ابعاد هندسی قطعه، بر روی چقرمگی شکست سنگ مرمر هرسین"، مجلۀ انجمن زمین‌شناسی مهندسی ایران، 2 (1388) 72-83. ## 29. Carloni C., Santandrea M., Baietti G., "Influence of the width of the specimen on the fracture response of concrete notched beams", Engineering Fracture Mechanics, (2018). ## 30. Stewart C. M., Oputa C. W., Garcia E., "Effect of specimen thickness on the fracture resistance of hot mix asphalt in the disk-shaped compact tension (DCT) configuration", Construction and Building Materials, 160 (2018) 487-96. ## 31. Aliha M. R. M., Saghafi H., "The effects of thickness and Poisson’s ratio on 3D mixed-mode fracture. Engineering Fracture Mechanics", 98 (2013)15-28. ## 32. Aliha M. R. M., Ayatollahi M. R., Akbardoost J., "Typical Upper Bound-Lower Bound Mixed Mode Fracture Resistance Envelopes for Rock Material", Rock Mechanics and Rock Engineering, 45 (2012) 65-74. ## 33. Ayatollahi M. R., Aliha M. R. M., "On determination of mode II fracture toughness using semi-circular bend specimen", International Journal of Solids and Structures, 43 (2006) 5217-27. ## 34. Ayatollahi M. R., Sistaninia M., "Mode ІІ fracture study of rocks using Brazilian disk specimens", International Journal of Rock Mechanics and Mining Sciences, 48 (2011) 819-26. ## 35. Backers T., "Fracture toughness determination and micromechanics of rock under Mode I and Mode II loading" (2005). ## 36. Backers T., Stephansson O., Rybacki E., "Rock fracture toughness testing in Mode II-punch-through shear test", International Journal of Rock Mechanics and Mining Sciences, 39 (2002) 755-69. ## 37. Kuruppu M. D., Obara Y., Ayatollahi M. R., Chong K. P., Funatsu T., "ISRM-Suggested Method for Determining the Mode I Static Fracture Toughness Using Semi-Circular Bend Specimen", Rock Mechanics and Rock Engineering, 47 (2014) 267-74. ## 38. Akbardoost J., Rastin A., "Comprehensive data for calculating the higher order terms of crack tip stress field in disk-type specimens under mixed mode loading", Theoretical and Applied Fracture Mechanics, 76 (2015) 75-90. ## 39. Anderson T. L., "Fracture Mechanics: Fundamentals and Applications: CRC Press" (2004). 40. Sanford R. J., "Principles of Fracture Mechanics: Pearson" (2002). ## 41. Schmidt R. A., Lutz T. J., "KIc and JIc of Westerly granite: effects of thickness and in-plane dimensions", West Conshohocken, PA: ASTM International, (1979). ## 42. Chong K. P., Kuruppu M. D., Kuszmaul J. S., "Fracture toughness determination of layered materials", Engineering Fracture Mechanics, 28 (1987) 43-54. ## 43. Ingraffea A., Schmidt R. A., "Experimental verification of a fracture mechanics model for tensile strength prediction of Indiana limestone" (1978). ## 44. Singh R., Sun G., "An investigation into factors affecting fracture toughness of coal measures sandstone". Journal of Mines, Metals and Fuels, 38 (1990) 111-8. ## 45. Barton C. C., "Variables In Fracture Energy And Toughness Testing Of Rock", The 23rd US Symposium on Rock Mechanics (USRMS), Berkeley, California: American Rock Mechanics Association, (1982) 14. ##