1. Hoek E., Diederichs M. S., "Empirical estimation of rock mass modulus", International Journal of Rock Mechanics and Mining Science, 43 (2) (2006) 203-215.## 2. Zhang L., "Determination and applications of rock quality designation (RQD)", Journal of Rock Mechanics and Geotechnical Engineering, 8 (3) (2016) 389-397. ## 3. ذوالفقاری ع.، سهرابی بیدار ع.، ملکی جوان م.، هفتانی م.، "بررسی اثر تزریق دوغاب بر مدول تغییر شکل‌پذیری توده سنگ با ارزیابی پارامترهای سیستم Q(بررسی موردی پی سنگ سدهای بختیاری، بازفت و خرسان 2) "، نشریه زمین شناسی مهندسی، 8 (1393) 2168-2139. ## 4. American Society for Testing and Materials, ASTM D 4394-84, "Standard test method for determining the in situ modulus of deformation of rock mass using the rigid plate loading method", ASTM International, West Conshohocken, Penn (1998). ## 5. ISRM, "The Blue Book-The Complete ISRM Suggested Methods for Rock Characterization, Testing and Monitoring 1974-2006", Ulusay R., Hudson J. A., (eds.), Ankara: ISRM & ISRM Turkish National Group, (2007). ## 6. İbrahim Ferid Öge, "Determination of deformation modulus in a weak rock mass by using menard pressuremeter", International Journal of Rock Mechanics and Mining Science, 112 (2018) 238-252. ## 7. Barton N., "Rock mass classification, tunnel reinforcement selection using the Q-system", In: Proceedings of the ASTM Symposium on Rock Classification Systems for Engineering Purposes, Cincinnati, Ohio, (1987). ## 8. Barton N., "Some new Q value correlations to assist in site characterization and tunnel design", International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 39 (2) (2002) 185-216. ## 9. Bieniawski Z. T., "Determining rock mass deformability: Experience from case histories", International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts. 15 (5) (1987) 237-247. ## 10. Galera J. M., Alvarez Z., Bieniawski Z. T., "Evaluation of the deformation modulus of rock masses using RMR, comparison with dilatometer tests", Workshop: Underground Works under Special Conditions: Proceedings of the ISRM Workshop W1. Madrid, Spain, (2007). ## 11. Grimstad E., Barton N., "Updating the Q-System for NMT", In: International Symposium on Sprayed Concrete-Modern Use of Wet Mix Sprayed Concrete for Underground Support, Oslo, (1993). ## 12. Hoek E., Brown E. T., "Practical estimates of rock mass strength", International Journal of Rock Mechanics & Mining Sciences, 34 (8) (1997) 1165-1186. ## 13. Mehrotra V. K., "Estimation of engineering parameters of rock mass", Ph.D. Thesis, University of Roorkee, Roorkee, India, (1992). ## 14. Mitri H. S., Edrissi R., Henning J., "Finite element modeling of cable-bolted stopes in hard rock underground mines", In: Proceedings of the SME Annual Meeting Albuquerque, New Mexico (1994). ## 15. Nicholson G. A., Bieniawski Z. T., "A nonlinear deformation modulus based on rock mass classification", International Journal of Mining and Geological Engineering, 8 (3) (1990) 181-202. ## 16. Palmstrom A., Singh R., "The deformation modulus of rock masses: Comparisons between in situ tests and indirect estimates", Tunnelling and Underground Space Technology, 16 (2) (2001) 115-131. ## 17. Read S. A. L., Richards L. R., Perrin N. D., "Applicability of the Hoek-Brown failure criterion to New Zealand greywacke rocks", In: Proceedings of The Ninth International Congress on Rock Mechanics, Paris (1999). ## 18. Sanei M., Rahmati A., Faramarzi L., Goli S., Mehinrad A., "Estimation of rock mass deformation modulus in Bakhtiary Dam Project in Iran", In: F. Hudson, Tan (Eds.), Rock Characterization, Modeling and Engineering Design Methods, Taylor & Francis Group, London, (2013). ## 19. Serafim J. L., Pereira J. P., "Consideration of the geomechanics classification of Bieniawski", In: Proceedings of International Symposium on Engineering Geology and Underground Constructions, (1983). ## 20. Shen J., Karakus M., Xu C., "A comparative study for empirical equations in estimating deformation modulus of rock masses", Tunnelling and Underground Space Technology, 32 (2012) 245-250. ## 21. Stephens R. E., Banks D. C., "Moduli for deformation studies of the foundation and abutments of the Portugues Dam-Puerto Rico", In: Rock mechanics as a guide for efficient utilization of natural resources: Proceedings of the 30th US symposium, Morgantown, Rotterdam: Balkema (1989). ## 22. Kayabasi A., Gokceoglu C., Ercanoglu M., "Estimating the deformation modulus of rock masses: a comparative study", International Journal of Rock Mechanics and Mining Science, 40 (1) (2003) 55-63. ## 23. Fakhimi A., Salehi D., Mojtabai N., "Numerical back analysis for estimation of soil parameters in the Resalat Tunnel project", Tunnelling and Underground Space Technology, 19 (1) (2004) 57-67. ## 24. Jeon Y. S., Yang H. S., "Development of a back analysis algorithm using FLAC", International Journal of Rock Mechanics and Mining Science, 41 (1) (2004) 447-453. ## 25. Kaiser P. K., Zou D., Lang P. A., "Stress determination by back analysis of excavation-induced stress changes–a case study", Rock Mechanics and Rock Engineering, 23 (3) (1990) 167-184. ## 26. Oreste P., "Back-analysis techniques for the improvement of the understanding of rock in underground constructions", Tunnelling and Underground Space Technology, 20 (1) (2005) 7-21. ## 27. Ravandi E. G., Rahmannejad R., Feili Monfared A. E., Ghotbi Ravandi E., "Application of numerical modeling and genetic programming to estimate rock mass modulus of deformation", International Journal of Mining Science and Technology, 23 (5) (2013) 733-737. ## 28. Sakurai S., Takeuchi K., "Back analysis of measured displacements of tunnels", Rock Mechanics and Rock Engineering, 16 (3) (1983) 173-180. ## 29. Sakurai S., Akutagawa S., Takeuchi K., Shinji M., Shimizu N., "Back-analysis for tunnel engineering as a modern observational method", Tunnelling Underground Space Technology, 18 (2-3) (2003) 185-196. ## 30. Ting F. X., Zhang Z., Sheng Q., "Estimating mechanical rock mass parameters relating to the Three Gorges Project permanent shiplock using an intelligent displacement back analysis method", International Journal of Rock Mechanics and Mining Science, 37 (7) (2000) 1039-1054. ## 31. Zhang L. Q., Yue Z. Q., Yang Z. F., Qi J. X., Liu F. C., "A displacement-based back-analysis method for rock mass modulus and horizontal in situ stress in tunneling illustrated with a case study", Tunnelling and Underground Space Technology, 21 (6) (2006) 636-649. ## 32. Bertuzzi R., "Back-analysing rock mass modulus from monitoring data of two tunnels in Sydney, Australia", Journal of Rock Mechanics and Geotechnical Engineering, 9 (5) (2017) 877-891. ## 33. Vazaios I., Farahmand K., Vlachopoulos N., Diederichs M. S., "Effects of confinement on rock mass modulus: A synthetic rock mass modelling (SRM) study", Journal of Rock Mechanics and Geotechnical Engineering, 10 (3) (2018) 436-456. ## 34. مهندسین مشاور زایندآب، "گزارش مکانیک سنگ سیمای طرح پروژه آب‌رسانی به فلات مرکزی ایران"، وزارت نیرو (1392). ## 35. Hoek E., Carranza-Torres C., Corkum B., "Hoek-Brown failure criterion – 2002 Edition", In: Hammah R., Bawden W., Curran J., Telesnicki M. (Eds.), Proceedings of NARMS-TAC 2002, Mining Innovation and Technology, Toronto, (2002). ## 36. Sonmez H., Gokceoglu C., Ulusay R., "Indirect determination of the modulus of deformation of rock masses based on the GSI system", International Journal of Rock Mechanics and Mining Science, 41 (5) (2004) 849-857. ## 37. Sonmez H., Gokceoglu C., Nefeslioglu H. A., Kayabasi A., "Estimation of rock modulus: for intact rocks with an artificial neural network and for rock masses with a new empirical equation", International Journal of Rock Mechanics and Mining Science, 43 (2) (2006) 224-235. ## 38. Beiki M., Bashari A., Majdi A., "Genetic programming approach for estimating the deformation modulus of rock mass using sensitivity analysis by neural network", International Journal of Rock Mechanics and Mining Science, 47 (7) (2010) 1091-1103## 39. غفرالهی م.، مهدوی س.، "گزارش آزمون بارگذاری صفحه‌ای در ساختگاه سد بهشت‌آباد"، مهندسین مشاور زایند آب، وزارت نیرو (1392). ## 40. Sheory P. R., "A theory for in situ stresses in isotropic and transversely isotropic rock", International Journal of Rock Mechanics and Mining Science and geomechanics, 31 (1) (1994) 23-34## 41. Palmstrom A., "RMi-a rock mass characterization system for rock engineering purposes", PhD thesis, University of Oslo, Department of Geology, (1995). ##