Engineering Geology

Engineering Geology

Investigating the effective parameters on the stability system of tunnels using the Rock Engineering System (RES) method

Authors
Mehdi Talkhablou
Mahmoud Fatemi Aghda
Habibulah Heidari renani
kharazmi uni.
10.22034/JEG.2022.16.2.1014281
Abstract
The stabilization of underground spaces is one of the most challenging topics in engineering geology. There are several methods to determine the type of tunnel stabilization system, but most of these methods have several weaknesses. Therefore, the development of a method that comprehensively considers almost all parameters influencing tunnel stability and their interdependencies has not received sufficient attention. The aim of this research is to investigate the parameters influencing the stability of tunnels using the rock mechanics system method. In this paper, 6 tunnels with different geological characteristics were selected. The effective parameters on the primary stabilization of these tunnels were coded using the ESQ method. Subsequent analyses were performed using the RES rock engineering system method to estimate and evaluate the optimal tunnel stabilization system. The results showed that parameters such as weathering of the joint surface, backfill and joint spacing played a more effective role than other parameters. For comparison, the analyses were also carried out using the RMR rock mass ranking method. The comparison between the results of the RES and RMR methods showed that the results of the RES method are in better agreement with the actual tunnel conditions and the shotcrete thickness of the proposed stabilization system of the studied tunnels. Since there is no limit to the number of input parameters in this method and, on the other hand, the mutual influence of the parameters on each other is considered, the relationships obtained from the RES method in this research can be effectively used in engineering projects along with other methods.
Keywords
Underground space
Rock mass evaluation
Shotcrete
Initial support
Barton, N., and Bieniawski, Z., 2008, RMR and Q-Setting Record Straight: Tunnels & Tunnelling International.
Barton, N., and Grimstad, E., 2014, Forty years with the Q-system in Norway and abroad: Fjellsprengningsteknikk, Bergmekanikk, Geoteknikk, v. 4, p. 1-4.
Benardos, A., and Kaliampakos, D., 2004, A methodology for assessing geotechnical hazards for TBM tunnelling - Illustrated by the Athens Metro, Greece: International Journal of Rock Mechanics and Mining Sciences, v. 41, p. 987-999.
Berberian, M., 2014, Earthquake and Coseismic Surface Faulting on the Iranian Plateau; a Historical, Social, and Physical Approach, Elsevier, 770 p.:
Bieniawski, Z., 1973, Engineering classification of jointed rock masses: Civil Engineering= Siviele Ingenieurswese, v. 19, no. 73.12, p. 335-343.
Bieniawski, Z. T., 1974, Geomechanics classification of rock masses and its application in tunneling: [No source information available], v. 2.
Bieniawski, Z. T., 1989, Engineering rock mass classifications: a complete manual for engineers and geologists in mining, civil, and petroleum engineering, John Wiley & Sons.
Celada, B., Tardáguila, I., Varona, P., Rodríguez, A., and Bieniawski, Z., 2014, Innovating tunnel design by an improved experience-based RMR system, in Proceedings Proceedings of the world tunnel congress, p. 1-9.
Faramarzi, F., Mansouri, H., and Farsangi, M., 2013, Development of Rock Engineering Systems-Based Models for Flyrock Risk Analysis and Prediction of Flyrock Distance in Surface Blasting: Rock Mechanics and Rock Engineering, v. 47, p. 1291-1306.
Feng, X. T., Hudson, J. A., and Tan, F., 2013, Rock Characterisation, Modelling and Engineering Design Methods, CRC Press.
Golmohammadi, S., 2024, development-of-rock-engineering-system-based-models-for-tunneling-progress-analysis-and-evaluation-case-study-of-tailrace-tunnel-of-azad-power-plant-project: International Journal of Geological and Geotechnical Engineering, v. 18, p. 47-52.
Golmohammadi, S., and Bidgoli, M. N., 2023, Improvement of the Q-System Using the Rock Engineering System: A Case Study of Water Conveyor Tunnel of Azad Dam: International Journal of Geotechnical and Geological Engineering, v. 17, no. 5, p. 97-101.
Habibi, R., Pourkermani, M., Ghorashi, M., Almasian, M., and Jarahi, H., 2023, The Effects of Quaternary Sediments on Earthquake Acceleration: Himalayan Geology, v. 44, p. 71-80.
Hudson, J., 1992, Rock engineering systems. Theory and practice.
Hudson, J., 2013, A review of Rock Engineering Systems (RES) applications over the last 20 years: ISRM SINOROCK 2013.
Hudson, J., and Feng, X.-T., 2015, Rock Engineering Risk, Xia-Ting Feng CRC Press/Balkema, Taylor & Francis Group, 527 p.:
Jarahi, H., 2021, Paleo Mega Lake of Rey Identification and Reconstruction of Quaternary Lake in Central Iran: Open Quaternary, v. 7, no. 1, p. 1-15.
Jarahi, H., and Seifilaleh, S., 2016, Rock fall hazard zonation in Haraz highway: American Journal of Engineering and Applied Sciences, v. 9, p. 371-379.
Khatik, V. M., and Nandi, A. K., 2018, A generic method for rock mass classification: Journal of Rock Mechanics and Geotechnical Engineering, v. 10, no. 1, p. 102-116.
Khosronezhad, A., Pourkermani, M., Almasiyan, M., Bouzari, S., and Uromeihy, A., 2023, Landslide susceptibility zoning based on Rock Engineering System application to the Tehran case study: Terra Nova.
Komurlu, E., and Demir, S., 2019, Use of Rock Mass Rating (RMR) Values for Support Designs of Tunnels Excavated in Soft Rocks without Squeezing Problem: GeoScience Engineering, v. 65, p. 1-17.
Lowson, A., and Bieniawski, Z., Critical assessment of RMR based tunnel design practices: a practical engineer’s approach, in Proceedings Proceedings of the SME, rapid excavation and tunnelling conference, Washington, DC2013, p. 180-198.
Mohammadi, H., and Azad, A., 2020, Applying Rock Engineering Systems Approach for Prediction of Overbreak Produced in Tunnels Driven in Hard Rock: Geotechnical and Geological Engineering, v. 38, no. 3, p. 2447-2463.
Naghadehi, M. Z., Jimenez, R., KhaloKakaie, R., and Jalali, S.-M. E., 2011, A probabilistic systems methodology to analyze the importance of factors affecting the stability of rock slopes: Engineering Geology, v. 118, no. 3, p. 82-92.
Pells, P., Bieniawski, Z., Hencher, S., and Pells, S., 2017, Rock quality designation (RQD): time to rest in peace: Canadian Geotechnical Journal, v. 54, no. 6, p. 825-834.
Singh, B., and Goel, R. K., 2011, Chapter 6 - Rock Mass Rating, in Singh, B., and Goel, R. K., eds., Engineering Rock Mass Classification: Boston, Butterworth-Heinemann, p. 45-62.
Yan-jun, S., Rui-xin, Y., Geng-she, Y., Guang-li, X., and Shan-yong, W., 2017, Comparisons of evaluation factors and application effects of the new [BQ] GSI system with international rock mass classification systems: Geotechnical and Geological Engineering, v. 35, p. 2523-2548.
Yang, Y., and Zhang, Q., 1998, The application of neural networks to Rock Engineering Systems (RES): International Journal of Rock Mechanics and Mining Sciences, v. 35, p. 727-745