Engineering Geology

Engineering Geology

Determination of Direction and Magnitude of in Situ Stresses by Borehole Breakout Method in an Oil well in the Southwest of Iran

Authors
Abstract
Introduction

Determination of in situ stress-direction and magnitude are prerequisite for any oil well drilling and oil field development such as hydraulic fracturing. One of the simplest and most widely used methods is called borehole breakout analysis. Breakouts are compression fractures made in the direction of minimum horizontal in situ stress (Sh), if drilling mud pressure be lower than optimum mud pressure. Some borehole imaging logs such as FMI, FMS and UBI are appropriate tools for wellbore fracture detection. These fractures are distinguished in the logs as dark and symmetrical points (or lines) on both sides of the well and are used as an indicator for in situ stress studies. The size and shape of these fractures are strongly depend on the magnitude of the in situ stress. Therefore, many researchers suggested that by analyzing the geometric shape of the borehole breakout is an appropriate technique for estimation of in situ stress components. .... ./files/site1/files/0Extended_Abstract7.pdf
Keywords

1. Zoback M., et al., "Determination of stress orientation and magnitude in deep wells", International Journal of Rock Mechanics and Mining Sciences, 40 (7) (2003) 1049-1076. ## 2. Walton G., et al., "Borehole Breakout Analysis to Determine the In-Situ Stress State in Hard Rock", in 49th U.S. Rock Mechanics/Geomechanics Symposium 2015, American Rock Mechanics Association: San Francisco, California. ## 3. Amadei B., Stephansson O., "Rock stress and its measurement", Springer Science & Business Media (1997). ## 4. Kim G.Y., Narantsetseg B., "Fractures and Breakouts Analysis from Borehole Image Logs: Preliminary Results for Interpretation of Stress History and In Situ Stress State", Marine Georesources & Geotechnology, (2014) (just-accepted). ## 5. Haimson B., Lee H., "Borehole breakouts and compaction bands in two high-porosity sandstones", International Journal of Rock Mechanics and Mining Sciences, 41(2004) 287-301. ## 6. Zoback M. D., "Reservoir geomechanics", (2007). ## 7. Leeman E., "The measurement of stress in rock", National Mechanical Engineering Research Institute (1964). ## 8. Bell J., Gough D., "Northeast-southwest compressive stress in Alberta evidence from oil wells. Earth and Planetary Science Letters, 45(2) (1979) 475-482. ## 9. Dart R. L., Zoback M. L., "Wellbore breakout stress analysis within the central and eastern continental United States", The Log Analyst, 30 (01) (1989). ## 10. Zoback M., "First-and second-order patterns of tectonic stress: The World Stress Map Project", Journal of Geophysics Research, 97 (B8) (1992) 11703-11728. ## 11. Lee H., Haimson B., "Borehole breakouts and in-situ stress in sandstones", Vitrification in Assisted Reproduction, (2015) 201. ## 12. Lin W., et al., "Localized rotation of principal stress around faults and fractures determined from borehole breakouts in hole B of the Taiwan Chelungpu-fault Drilling Project (TCDP)", Tectonophysics, 482 (2010) 82-91. ## 13. Shamir G., Zoback M. D., "Stress orientation profile to 3.5 km depth near the San Andreas fault at Cajon Pass, California", Journal of Geophysical Research: Solid Earth (1978–2012), 1992. 97(B4): p. 5059-5080. ## 14. Zajac B. J., Stock J. M., "Using borehole breakouts to constrain the complete stress tensor: Results from the Sijan Deep Drilling Project and offshore Santa Maria Basin, California", Journal of Geophysical Research: Solid Earth (1978–2012), 102 (B5) (1997) 10083-10100. ## 15. Te Kamp L., Rummel F., Zoback M., "Hydrofrac stress profile to 9 km at the German KTB site", in Proc. Workshop on Rock Stresses in the North Sea (1995). ## 16. Ask D., Ask M., "Detection of potential borehole breakouts in boreholes KFM01A and KFM01B", SKB P-report in prep (2006). ## 17. Cui J.-w., et al., "Wellbore breakouts of the main borehole of Chinese Continental Scientific Drilling (CCSD) and determination of the present tectonic stress state", Tectonophysics, 475 (2009) 220-225. ## 18. Heidbach O., et al., "Global crustal stress pattern based on the World Stress Map database release 2008". Tectonophysics, 482 (1) (2010) 3-15. ## 19. Kirsch G., "Die theorie der elastizität und die bedürfnisse der festigkeitslehre", (1898) Springer. 20. Jaeger J. C., Cook N. G. W, Zimmerman R., "Fundamentals of rock mechanics" (2009). 21. Zoback M. D., et al., "Well bore breakouts and in situ stress", Journal of Geophysical Research: Solid Earth, 90 (B7) (1985) 5523-5530. ## 22. Moos D., Zoback M. D., "Utilization of observations of well bore failure to constrain the orientation and magnitude of crustal stresses: application to continental, Deep Sea Drilling Project, and Ocean Drilling Program boreholes", Journal of Geophysical Research: Solid Earth (1978–2012), 95 (B6) (1990) 9305-9325. ##