Engineering Geology

Engineering Geology

Investigating the effect of the statistical distribution function of the GSI on the probabilistic analysis of rock mass geomechanical parameters

Authors
Mojtaba Rabiei Vaziri
Hamidreza Mohammadi Azizabadi
10.18869/acadpub.jeg.10.1.3325
Abstract
Hoek and Brown suggested a method to estimate the strength and deformation modulus parameters of rock masses. The method was then widely used in rock engineering designs. In such designs, the mean values of Hoek and Brown parameters are often used which are not proper values due to the variability of rock mass properties within a great range of values. In such cases, probability analysis of rock mass properties is highly important. The geological strength index is one of the most important parameters in Hoek and Brown equations. Determination of this parameter includes greater uncertainties than determining other parameters. In this paper, based on the results of rock mechanical tests carried out on rock samples of Gol-Gohar iron ore mine, and the required field surveys, the sensitivity of rock mass geomechanical properties on the type of the statistical distribution function of the geological strength index in statistical analysis of these parameters using Monte Carlo simulation method was investigated. The results showed that the sensitivity of Hoek and Brown equations to determine different rock mass geomechanical parameters varies as the type of the statistical distribution function of the geological strength index changes. The sensitivity of geomechanical parameters such as internal friction angle, cohesion, total strength and rock mass modulus on the type of the statistical distribution function of the geological strength index is much less than parameters such as uniaxial compressive strength and tension strength of rock mass. The greatest variations based on changes of the type of the statistical distribution function of the geological strength index are less than 5% for the internal friction angle, cohesion and total strength, less than 10% for the modulus, and less than 25% for the uniaxial compressive strength and tension strength.
Keywords
rock mass properties
GSI
Monte Carlo simulation
Gol-Gohar mine No. 1
Hoek and Brown failure criteria
1. Sari M., Karpuz C., Ayday C., "Estimating rock mass properties using Monte Carlo simulation: Ankara andesites", Computers & Geosciences, Vol. 36 (2010) 959-969.## 2. Hoek E., "Reliability of the Hoek-Brown estimates of rock mass properties and their impact on design", International Journal of Rock Mechanics and Mining Sciences, Vol. 35 (1998) 63-68. ## 3. Sari M., "The stochastic assessment of strength and deformability characteristics for a pyroclastic rock mass", International Journal of Rock Mechanics and Mining Sciences, Vol. 46 (2009) 613-626. ## 4. Idris M.A., Saiang D., Nordlund E., "Numerical analyses of the effects of rock mass property variability on open stope stability", American Rock Mechanics Association (2011). ## 5. Hoel P.G., Port S.C., Stone C.J., "Introduction to probability theory", Houghton Mifflin Company (1971). ## 6. Baecher G.B., christen J.T., "Reliability and statistic in geotechnical engineering", John Wiley (2003). ## 7. Tobutt D., "Monte Carlo simulation methods for slope stability", Computers & Geosciences, Vol. 8 (1982) 199-208. ## 8. Robert C., Casella, "Monte Carlo statistical methods", 2nd ed G. Springer-verlag, New York (2004). ## 9. زارعی ا.، آمار کاربردی، انتشارات دانش پرور، تهران (1383). ## 10 .فروند جان، آمار ریاضی، ترجمه: علی عمیدی، محمد قاسم وحیدی اصل. مرکز نشر دانشگاهی، چاپ هشتم، تهران (1384). ## 11. Minitab web siteو "Tutorials of Minitab 16.2.2", Product licensed to: Hewlett-Packard corporation, Minitab web site ( http://www.minitab.com) (2010). ## 12. Hoek E., Carranza-Torres C.T., Corkum B., "Hoek-Brown failure criterion-2002 edition", In: Proceedings of the fifth North American rock mechanics symposium, Toronto, Canada, Vol. 1 (www.Rockscience.com) (2002) 267-273.. ##13. Singh B., Goel R.K., "Rock mass classification, a practical approach in civil engineering", Elsevier Science Ltd (1999). ## 14. Zhang L., "Engineering properties of rocks, Elsevier Geo-Engineering Book Series Volume 4", Elsevier Science Ltd (2005). ## 15. Sonmez H., Ulusay R., "Modification to the Geological Strength Index (GSI) and their applicability to stability of slopes", International Journal of Rock Mechanics and Mining Sciences, Vol. 36 (1999) 743-760. ## 16. Sonmez H., Ulusay R., "A discussion on the Hoek- Brown failure criterion and suggested modification to the criterion verified by slope stability case studies", Yerbilimleri (Earth sciences), Vol. 26 (2002) 77-99. ## 17. Hack R., Price D., Rengers N., "A new approach to rock slope stability-a probability classification (SSPC)", Bull Eng Geol Environ, Vol. 62 (2003) 167-184. ## 
Engineering Geology
Volume 10, Issue 1 - Serial Number 24
Summer 2016
Pages 3325-3350