Volume 5, Issue 1 (9-2011)                   2011, 5(1): 1077-1088 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Fereidooni D. Introduce of new equations for calculation of joint compressive strength (JCS) and elasticity modulus in hard rocks, using Schmidt Hammer results. Journal of Engineering Geology 2011; 5 (1) :1077-1088
URL: http://jeg.khu.ac.ir/article-1-367-en.html
Abstract:   (8813 Views)
Schmidt hammer is used for calculation of joint compressive strength and elasticity modulus of rocks. Today, application of Schmidt hammer is a common method in evaluation of properties of rocks. This method is quick, inexpensive and non-destructive which are benefits of this method. In this regard, different experimental equations proposed by Barton & Choubey (1977), Deere (1960), Keadbinski (1980), Aufmuth (1973) and ISRM (1981) can be employed in order to calculate the Joint Compressive Strength (JCS) of rocks. Due to the importance of this research, new experimental equations are introduced. Using this equations show a very good results in comparison with the results of other researchers. It should be noted that this equations are achieved from 827 records of Schmidt Hammer results from different types of hard rocks such as granite, diorite and hornfels from the Ganjnameh-Shahrestaneh road in Hamedan province, west of Iran.
Full-Text [PDF 342 kb]   (4139 Downloads)    
Type of Study: Case-Study | Subject: En. Geology
Accepted: 2016/10/5 | Published: 2016/10/5

Add your comments about this article : Your username or Email:
CAPTCHA

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2024 CC BY-NC 4.0 | Journal of Engineering Geology

Designed & Developed by : Yektaweb