Journal of Engineering Geology
نشریه زمین شناسی مهندسی
Journal of Engineering Geology
Basic Sciences
http://jeg.khu.ac.ir
1
admin
2228-6837
2981-1600
doi
fa
jalali
1390
2
1
gregorian
2011
5
1
4
2
online
1
fulltext
fa
بررسی تأثیر کانیشناسی سنگدانهها بر کیفیت بتن
Study of aggregate mineralogy on concrete properties
مطالعه موردی
Case-Study
هدف این تحقیق بررسی تأثیر کانیشناسی و خواص ژئوشیمیایی سنگدانهها بر خصوصیات مکانیکی بتن است. برای تحقق این امر، سنگدانههایی با خواص پترولوژی مختلف از معادن فعال گردآوری شده و به آزمایشگاه منتقل شده است. نمونههای انتخاب شده شامل آندزیت، بازالت، گرانیت، گنایس، آهک، لوماشل، ماسه¬سنگ، دولومیت، توف و دیوریت است که دارای خواص شیمیایی، فیزیکی و مکانیکی مختلفی هستند. نتایج این تحقیق نشان داد که خواص فیزیکی و مکانیکی کانیها خواص مقاومتی بتن را تحت تأثیر قرار میدهند و مشخص شد که خصوصیات نامطلوب بتن با چه کانیهایی کنترل میشود. همچنین در این تحقیق مشخص شد که سنگدانههای با کانیهای سوزنی و ورقهای و همچنین کانیهای که در معرض فرسایش قرارگرفتهاند در خواص نامطلوب بتن تأثیر زیادی دارند. در این تحقیق بیشترین مقاومت 28 روزه بتن مربوط به سنگدانه دولومیتی با مقاومت فشاری 33 مگاپاسکال، و کمترین مقاومت مربوط به سنگدانه لوماشلی با 13 مگاپاسکال است.
The main objective of this research is to provide information about the effects of mineralogical characteristics of aggregates on concrete properties. Crushed aggregates were selected with different petrographics from different resources. Aggregates such as, Marble, Dolomite, Tuff, Granite, Genasis, Basalt, Andesite, Lumashele, Sand Stone and Diorite which have different chemical, physical and mechanical properties were used in this study. The results of the study showed that physical and mechanical properties of minerals control properties of concrete and undesirable properties of concrete influenced with which of mineral. Also, the results indicated that aggregates with flaky and elongated minerals subjected to weathering have a great effect on undesirable properties of concretes. The highest uniaxial compressive strength (33 MPa) at 28 curing days was measured in the specimens prepared with dolomite aggregates while the lowest strength (13 MPa) was measured in the specimen prepared with lumashele aggregates at the same age.
بتن , مقاومت , سنگدانه , پترولوژی , کانیشناسی ,
Concrete , mechanical properties , Aggregate , Petrology , mineralogy ,
971
986
http://jeg.khu.ac.ir/browse.php?a_code=A-10-3-45&slc_lang=fa&sid=1