Journal of Engineering Geology
نشریه زمین شناسی مهندسی
Journal of Engineering Geology
Basic Sciences
http://jeg.khu.ac.ir
1
admin
2228-6837
2981-1600
doi
fa
jalali
1396
5
1
gregorian
2017
8
1
11
1
online
1
fulltext
fa
اصلاح شاخص سایش شیمازک به منظور بهبود کاربردهای آن در مهندسی سنگ
Modification of Schimazek Abrasivity Index for Improving its Application in Rock Engineering
ژئوتکنیک (مکانیک خاک و سنگ)
Geotecnic
مقاله پژوهشی
Original Research
<p>تاکنون شاخصها و روشهای مختلفی برای ارزیابی قابلیت سایندگی سنگها ارائه شده است. به طور کلی این شاخصها را میتوان به دو دسته روشهای مبتنی بر ذات سنگ و روشهای مبتنی بر ابزارهای ابتکاری تقسیمبندی نمود. روش شاخص شیمازک یکی از قویترین و پرکاربردترین روشهای ارزیابی سایندگی سنگ است. این شاخص بر مبنای اندازه دانهها، مقاومت کششی برزیلی و میزان کوارتز محتوی معادل ارائه شده است. با توجه به اینکه ارزش هر سه پارامتر فوق در شاخص شیمازک یکسان در نظر گرفته شده است، لذا در بعضی مواقع این شاخص قدرت تشخیص مناسبی را ندارد. در این تحقیق سعی شده است تا با استفاده از روش تحلیل سلسله مراتبی فازی دلفی (FDAHP) وزن هر یک از سه معیار فوق در سایندگی سنگ اعمال شده و بر طبق این وزنها شاخص شیمازک اصلاح شود. در مرحله بعد برای اعتبارسنجی شاخص جدید 10 نمونه سنگ ساختمانی مورد مطالعه قرار گرفته و شاخص سایندگی قدیمی و اصلاح شده آنها محاسبه شده است. سپس سرعت برش هر سنگ تبت شده و رابطه ریاضی بین سرعت برش و شاخص قدیمی و شاخص جدید به دست آمده است. نتایج نشان میدهد که شاخص سایندگی شیمازک جدید توانایی به مراتب بالاتری نسبت به شاخص قدیمی دارد.</p>
<strong><a href="./files/site1/files/4Extended_Abstract.pdf">./files/site1/files/4Extended_Abstract.pdf</a>Extended Abstract</strong><br>
(Paper pages 73-90)<br>
<strong>Introduction</strong><br>
Up to now, various indexes and methods have been presented for evaluating the abrasivity of rocks. In total, these methods can be divided to two main groups; the methods based on nature of rocks, methods based on heuristic tools. Schimazek F-abrasivity index is one of the most powerful and applicable indexes for evaluating the rock abrasiveness. This index uses the grain size, Brazilian tensile strength and equivalent quartz content for abrasivity analysis. Since the values of these parameters are equal in Schimazek index, therefore, in some cases this index doesn't have suitable ability to distinguish and classify the rock abrasiveness. This paper tries to modify the Schimazek index considering the weights of its applied parameters.<br>
<strong>Material and Methods</strong><br>
In this research, Fuzzy Delphi Analytical Hierarchy Process (FDAHP) has been used to calculate the weight of dominant parameters in rock abrasivity. For this purpose several questioners have been distributed and the expert opinions were collected. The results showed that the quartz content, grain size and tensile strength have the weight of 0.4, 0.31 and 0.29 respectively and new Schimazek F-abrasivity index is as presented in equation (1).<br>
<img alt="" src="./files/site1/images/3(1).jpg" style="width: 356px; height: 38px; " ><br>
In the next stage, in order to facilitate the application of new index, a new classification system was developed. This classification and related weighing graphs (Figure 1) help to change the discontinuous classification to continuous one.<br>
<strong>Results and discussions</strong><br>
In order to verify the application of the new developed index, ten ornamental stones have been studied and the old and modified Schimazek indexes were calculated for all of them. Then, the cutting rate (sawing rate) of each stone was recorded in laboratory and the mathematical relationships between new and old indexes have been achieved. The results show that the new Schimazek abrasivity index has higher ability to predict the cutting rate than old one (Figure 2). <br>
<br>
<img alt="" src="./files/site1/images/1(1).jpg" style="width: 308px; height: 205px; " > <br>
<strong><span dir="LTR">Figure1. Continuous weighting for parameters of Schimazek F-abrasivity index</span></strong><br>
<br>
<img alt="" src="./files/site1/images/2(2).jpg" style="width: 356px; height: 129px; " ><br>
<strong><span dir="LTR">Figure2. Regression of old and new </span></strong><strong><span dir="LTR">Schimazek F-abrasivity index with cutting rate of granite ornamental stones</span></strong><br>
<strong>Conclusion</strong><br>
Generally it could be concluded that, the main weakness of Schimazek F-abrasivity index which is the equality of parameters’ importance, has been removed by idea developed and confirmed in this study. The different weights which allocated to grain size, Brazilian tensile strength and equivalent quartz content in study, improves the Schimazek index applicability in rock engineering applications specially rock cutting and drilling. Therefore, it is recommended to use new method instead of old one in future applications.<br>
<br>
<br>
<br>
<br>
<br>
سنگ, سایندگی, شاخص شیمازک, سرعت برش
abrasivity index has higher ability than old one. کلیدواژگان [English] rock, abrasivity, Schimazek index, cutting rate.
73
90
http://jeg.khu.ac.ir/browse.php?a_code=A-10-152-1&slc_lang=fa&sid=1
M
Ataei
محمد
عطایی
ataei@shahroodut.ac.ir
10031947532846001669
10031947532846001669
Yes
دانشگاه صنعتی شاهرود، دانشکده معدن، نفت و ژئوفیزیک
sh.
hosseini
سیدهادی
حسینی
10031947532846001670
10031947532846001670
No
دانشگاه صنعتی اصفهان، دانشکده مهندسی معدن
S.H
Hoseinie
رضا
میکائیل
10031947532846001671
10031947532846001671
No
دانشگاه صنعتی ارومیه، دانشکده مهندسی معدن