RT - Journal Article T1 - Analysis of a Large-Scale Landslide Using Shear Strength Reduction Factor Method, Case Study: Manjil Landslide JF - jeg YR - 2020 JO - jeg VO - 13 IS - 5 UR - http://jeg.khu.ac.ir/article-1-2745-en.html SP - 59 EP - 92 K1 - Manjil landslide K1 - Finite element model K1 - Shear strength reduction factor method K1 - Pile-to-pile cap connections K1 - Stability analysis. AB - Slope stability could be a major concern during the construction of infrastructures. This study is focused to analyze the slope stability of Manjil landslide that was located 41+400 to 42+200 km along Qazvin-Rasht freeway, Iran. The Manjil landslide, which had 168 m long and approximately 214 m wide, was occurred due to inappropriate cutting in June 2013 and led to destructive and closure of freeway. Slope stability analysis was carried out using a finite element shear strength reduction method (FE-SRM). The PHASE2D program was utilized in order to model the slope cutting and stability of landslide. Slope angle was flatted with 3H:2V geometry and stabilized with piling. The results indicated safety factors of 1.95 and 1.17 in the static and pseudo-static states, respectively, while the maximum bending moment with single pile (SP) in the pseudo-static state was 5.69 MN. Maximum bending moment of the pile around the slip surface was significantly large and more than the bending moment capacity of the pile. Due to the large bending moment on the pile, pile-to-pile cap connections (two pile group: 2PG) should be designed at the toe of the slope. The obtained results showed reduction of this parameter to 2.48 MN. Thus, it can be concluded that 2PG is a suitable stabilization method for the Manjil landslide. LA eng UL http://jeg.khu.ac.ir/article-1-2745-en.html M3 ER -