Search published articles


Showing 3 results for Sodium
The Effect of Sodium Chloride Solution on Swelling, Compressibility and Permeability of Bentonite
N Shariatmadari, M.mehdi Yazdanpanah, Saeid Saeidijam,
Volume 8, Issue 3 (12-2014)
Abstract
Saline sea water, groundwater into salt domes or municipal waste leachate can affect hydro-mechanical properties of bentonite as a sealing material in nuclear waste repositories or landfills. This paper investigated the effect of sodium chloride solution on Atterberg’s limit, swelling, consolidation and permeability of bentonite. Swelling and consolidation test had been done at 0.05, 0.1, 0.5 and 2 molar solution and pure water by oedometer apparatus in Iran University of Science and Technology. Considering the results, it can be seen that a little increase in concentration of the solution reduces swelling of bentonite. So that the swelling potential of bentonite reduced from about 82% to about 1.5% by increasing in concentration of the solution from pure water to 2 molar solution. Liquid limit and plastic index of bentonite were reduced by increasing concentration of the solution but plastic limit was not changed significantly. Meanwhile increased concentration of the solution will facilitate reaching equilibrium for swelling and consolidation of the samples which occur due to their enhanced permeability. Permeability of bentonite increased about 7 times by increasing in concentration of solution from pure water to 2 molar solutions. Also, the Compressibility of bentonite was reduced by increasing in concentration of sodium chloride in the solution.
The effect of pumice on the geotechnical properties of sodium salty silty soil
Aylar Hosniyeh, Dr Rouzbeh Dabiri, Alireza Alizadeh Majdi, Elnaz Sabbagh,
Volume 16, Issue 4 (12-2022)
Abstract
Silty soils containing sodium content, known as salty silty soils, are classified as another type of problematic soil. When this type of soil comes into contact with water, it can swell and diverge, leading to settlement and deformation. Considering that a significant part of the Urmia Lake basin and the Tabriz plain consists of sodium-rich fine soils, the aim of the project is to improve the quality of the soils. Therefore, one of the main objectives of this study is to assess the sediments within the lake bed in order to reduce erosion and to evaluate the possibility of improving and stabilizing the sodium saline silty soils in the area using the geopolymerization technique. To achieve this, pumice material with pozzolanic properties was separately mixed with the soil under investigation at weight percentages of 3%, 5% and 7%, together with a calcium hydroxide solution as a catalyst at concentrations of 2%, 5% and 7%. The samples were then cured for one day. Laboratory tests, including compaction, uniaxial compressive strength, direct shear, and consolidation, were carried out to evaluate the geotechnical behavior of the improved soil. The results obtained indicate that the combination of 3% pumice with 2% calcium hydroxide increased the uniaxial compressive strength of the stabilized sample by 1.32 times after one day of curing. In addition, the mixture of 7% pumice with 2% calcium hydroxide significantly improved the internal friction angle by 20 times. Finally, the combination of 7% pumice with 2% calcium hydroxide reduced the value of free swelling potential by up to 86%.
 

The Engineering Characteristics of Silty Loess Contaminated with Natural Salts
Dr Emad Namavar,
Volume 19, Issue 4 (12-2024)
Abstract
A considerable part of Golestan Province is covered by loess soils, most of which are of the silty loess type, which is one of the most problematic soils. The proximity of the Caspian Sea leads to salinity of the groundwater in some areas of the province. Due to high evaporation, salts reach the surface and cause salinization of the silty loess soils at the surface. The presence of soluble salts can lead to changes in the engineering properties of silty loess soils at the site of construction projects. It is therefore necessary to investigate the influence of salts on the geotechnical properties of silty loess soils. The aim of this study was to investigate the effect of sodium chloride or halite (NaCl) and calcium sulphate or gypsum (CaSO4.2H2O) salts, as the two most abundant natural salts, on the engineering properties of silty loess soils. For this purpose, silty loess soil samples were collected from Maraveh Tappeh city, Golestan province, Iran. Geotechnical tests including uniaxial compressive strength, shear strength and standard compaction tests were then carried out on soil samples in the natural state and with 3, 5, 7, and 9% NaCl and CaSO4.2H2O. Based on these tests, the variation in optimum water content (ωopt), maximum dry density (ρdmax), uniaxial compressive strength (UCS), cohesion (C), internal friction angle (φ) were evaluated. The results showed that these parameters increased with increasing both natural salts concentration. Finally, the reason for the changes in the engineering properties of the soil samples due to the presence of these two natural salts was discussed.

Page 1 from 1     

© 2025 CC BY-NC 4.0 | Journal of Engineering Geology

Designed & Developed by : Yektaweb