[Home ] [Archive]   [ فارسی ]  
:: Main About Current Issue Archive Search Submit Contact ::
:: Volume 13, Issue 5 (English article specials 2020) ::
JEG 2020, 13(5): 177-205 Back to browse issues page
Shear Strength-Dilation Characteristics of Silty and Clayey Sands
Vahid Yousefpour Mr *1, Amir Hamidi Mr2, Ali Ghanbari Mr2
1- Master of Science, School of Engineering, Kharazmi University , std_yousefpour@khu.ac.ir
2- professor, School of Engineering, Kharazmi University
Abstract:   (820 Views)
Sandy soils usually contain different amounts of fines like silt and clay, causing some changes to their shear strength and dilation characteristics. Bolton [1] conducted  some experiments on the different sands and suggested a relation between the parameters of the soil shear strength. In this paper, some experiments were performed on fine contained sand and the extended Boltonchr('39')s relation was has been proposed. In this paper, shear strength and dilation behavior of a pure sand mixed with different amounts of silt or clay fines were studied using direct shear test device (100*100*30 mm), and a total of 96 tests were carried out. The samples were prepared separately using clay and silt contents of 0, 10, 20 and 30% in different relative densities of 70, 80, 90 and 100%. They were tested under three surcharge pressures of 90, 120 and 150 kPa, under particle crushing threshold. Variations in shear strength, maximum friction angle, critical state friction angle and cohesion, as well as dilation angle were investigated by increasing in the mentioned amounts. The results demonstrate that shear strength, dilation angle, maximum friction angle decreased by clay content increase, however, they increase with increase in silt content. In addition, a new form of the Boltonchr('39')s relation for fine contained sandy soils was presented.
Keywords: Direct shear test, shear strength, dilation, clay content, silty sand.
Full-Text [PDF 1101 kb]   (218 Downloads)    
Type of Study: Research Paper | Subject: Geotecnic
Received: 2019/01/20 | Accepted: 2019/07/1 | Published: 2020/06/9
Add your comments about this article
Your username or Email:


XML   Persian Abstract   Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Yousefpour V, Hamidi A, Ghanbari A. Shear Strength-Dilation Characteristics of Silty and Clayey Sands. JEG. 2020; 13 (5) :177-205
URL: http://jeg.khu.ac.ir/article-1-2865-en.html

Volume 13, Issue 5 (English article specials 2020) Back to browse issues page
نشریه زمین شناسی مهندسی Journal of Engineering Geology
Persian site map - English site map - Created in 0.07 seconds with 29 queries by YEKTAWEB 4258